Wilson Electronics The Duette, Owner'S Manual, Page: 49 / 81

s
e C t i O n
5 – C
a r e O f
D
u e t t e
W i l s o n A u d i o S p e c i a l t i e s
Section 5.0 – Care of the Finish
The Duette loudspeakers are
hand painted with WilsonGloss™
paint and hand polished to a high
luster. While the finish seems quite
dry to the touch, final curing and
complete hardening takes place over
a period of several weeks.
Removing Protective Film
To protect the finish of the Du -
ette during final manufacture, ship -
ment, and setup in the listening room,
a removable layer of protective film
has been applied over the finish. It
is recommended that this film be left
in place until the speakers are in their final location in the listening room. Once their
final position has been determined, remove the film by following this procedure:
1. Ensure the speaker surface is room temperature before removing the
protective film. Removing the protective film when the speaker surface is
cold can damage the paint surface.
2. Slowly remove the film from the top down, large sections at a time,
gently pulling the film downward and outward. Tearing the film aggres
-
sively can damage the paint.
3. Take care in removing the protective film near edges and corners to
prevent paint damage in these areas.
4. The protective film should not be left on the painted surface for ex -