Wilson Electronics The Duette, Owner'S Manual, Page: 21 / 81

1
W i l s o n A u d i o S p e c i a l t i e s
• You may rotate the spike tips in place by using a Vice-grip® or toothed pli -
ers.
• To find out which spike to lower, gently rock the stand back and forth. This
will identify the stand spike that is out of level from the other three.
• Place a level on the front to back oriented axis. If it is level, then your
Duette stand is level. If the bubble shows that the stand is leaning toward
the front of the room, you will have to lengthen the front stand spikes down
toward the floor. If the bubble shows that the stand is leaning toward the
back of the room (behind the loudspeakers), you will have to lengthen the
rear stand spikes down toward the floor.
After you have leveled the Duette stands, use the 9/16 inch combination wrench
to tighten the stand spike nuts up against the stand, taking care to not rotate the spike.