Wilson Electronics The Duette, Owner'S Manual, Page: 44 / 81

on the appropriate side) of your Duet -
tes above the Magnepods. The magnetic
force will center the cone in its proper
location. The cones will now be at -
tached to the Duette, secured by the
Magnepods.
Remove the adhesive backing from
an “O” shaped cone gasket and careful -
ly place one over each cone. Smooth
the gasket around the cone, making
sure the adhesive has good contact to
the bottom of the Duette. See Figure
12.
The Duette is now ready to place
into the cabinet.
Note: It is important to properly install
the cone gasket to prevent the Duette
from sliding on its cone.
Positioning the Duette in Custom Cabinets
Wilson Audio makes available a Cabinet “rough-out” kit. This kit should be in -
stalled into the cabinet before the Duettes are installed. The Duette performance is
significantly enhanced when installed in conjunction with this kit.
Refer to the above tables and graphs (pages 38-41) to gain an understanding of
how Duette’s performance is affected by various vertical and horizontal placements.
The Duette benefits from fine tuning both side to side as well as front to back place -
ment, within the constraints and limits of the cabinet. The Duette should be slightly
D
u e t t e
O
w n e r
’
s
M
a n u a l
W i l s o n A u d i o S p e c i a l t i e s
f
igure
12 - t
he cone gaSketS are inStalleD over
the geometric coneS
�