Wilo STRATOS GIGA, Installation And Operating Instructions Manual

Page: 104 / 265

English
104 WILO SE 03/2018
4.2.4.0 Remaining time
until pump kick Time until the next pump kick
(after the pump has had a 24 h
standstill (e.g. via Extern off), it
will be automatically operated
for 5 seconds) Only displayed if pump kick is
activated
4.2.5.0 Mains On counter Number of switching-on
procedures of the supply voltage
(each occasion the supply
voltage is established after an
interruption is counted)
4.2.6.0 Pump kick counter Number of pump kicks carried
out Only displayed if pump kick is
activated
4.3.0.0 States
4.3.1.0 Base-load pump The value display statically
shows the identity of the regular
base-load pump.
The units display statically
shows the identity of the
temporary base-load pump Only displayed for double
pump master
4.3.2.0 SSM ON
State of the SSM relay if a fault
message is present
OFF
State of the SSM relay if no fault
message is present
4.3.3.0 SBM ON
State of the SBM relay if a
readiness/operation or mains On
signal is present
OFF
State of the SBM relay if no
readiness/operation or mains On
signal is present
SBM
Run signal
No. Designation Type Symbol Values/explanations Display conditions