20
This parameter is saved on the system, please set it when you use the machine
first time.
4)
Rotate head to 0 degree
. Move blade to left corner of material (
A
). Start position is
default “
origin of X0
”.
Warning
: Origin of blade must higher than top of stone. Otherwise blade will feed under
stone at width direction, the blade maybe damaged.
5)
Press command
to start Spindle on the operation panel, spindle indicate lamb
turns to green
after spindle reach normal speed.
6)
Turn on ‘Auto switch’
to start automatic cutting on the operation panel
Please set the thickness of blade correctly before cutting.
If you want to stop auto cycle, please use the switch
on the operation
panel. Or turn ‘Auto switch’
to ‘Manual mode’
Machine back to zero when cycle finish.
Summary of Contents for WS-8450
Page 1: ...WS 8450 Bridge Saw Operation Manual...
Page 7: ...5 1 2...
Page 17: ...15 Rotate head to 90 degrees...
Page 38: ...36 5 4 Hydraulic system...
