Willy WS-8450, Operation Manual

Page: 13 / 38

11
4 Table rotate switch
Left: rotate table anticlockwise.
Right: rotate table clockwise.
5
Joystick axis
motion XZ
X+, X-: Move X axis.
Z+,Z-: Move Z axis.
6
Joystick axis
motion Y
Move Y axis.
7 Spindle start Start spindle.
8 Spindle stop Stop spindle.
9 Laser Turn laser on/off.
10 Power on switch
Turn on the power of the control
system.
11 Potentiometer 1 Adjust the feed rate of X axis and Z axis.
12 Potentiometer 2 Adjust the feed rate of Y axis.
13 Auto mode start Automatic cutting starts.