Willy WS-8450, Operation Manual

Page: 16 / 38

14
speed reaches a normal value. Auto mode can’t be triggered until this lamp turns to green.
Machine will back to zero (initial) position when this command is triggered.
3.4.3 Manual
Function of manual mode is to cut single line.
Press X+(X-), machine executes X direction single cut when head at 0 degree. Press Y+(Y-),
machine executes Y direction single cut when head at 90 degree. The value which “Distance”
specifies is cutting length.
Press Y+(Y-) when head at 0 degree, machine move along Y axis without Z feed. Press X+(X-)
when head at 90 degree, machine move along X axis without Z feed.
Distance : Specify single cutting length.
Z- Limit Location Value : Set Z value of wood top surface. Press to auto measure.

This parameter is the virtual of Z- limit switch. Set the data to a large negative
value before moving blade to top of wood.

This parameter is saved on the system, please set it when you use the machine
first time. Adjust this value when diameter of blade changes.
: Specify move direction.
: Machine return to zero position.
: Rotate head to 0 degree.