Willy WS-8450, Operation Manual

Page: 37 / 38

35
5.3 Servo parameter
NO. value Function
1-00 60 Maximum Output Frequency
1-04 36 Mid-Point Voltage
1-06 36 Minimum Output Voltage
1-08 4 Minimum Output Frequency
1-09 1 Accelerate Time
1-10 0.3 Decelerate Time
2-00 1 Source of Frequency
2-03 1 Source of Operation Command
5-00 60.00 1st Step Speed Frequency
5-01 2.500 2nd Step Speed Frequency
5-02 10.0 3rd Step Speed Frequency
Machine has 4 step speeds:
1. 1-00 Maximum output frequency. It’s the cutting speed which can be control by
potentiometer install on panel.
2. 5-00 1
st
step speed frequency. It’s the fast moving speed.
3. 5-01 2
nd
step speed frequency. It’s the decelerate speed when cutting.
4. 5-02 3
rd
step speed frequency. It’s the decelerate speed when feed.
FPGM/DATA (1) is use to select and save the parameter.
Up and Down is to adjust the parameter.
1