Willy WS-8450, Operation Manual

Page: 18 / 38

16
3.4.4 Profiling
Profiling function is use to process all kinds of line or abnormal stone. Please make the
profiling model before processing. Blade cuts along the model when blade is at 90 degrees.
Parameters:
Profiling Length(Y) : Specify the profiling length at Y axis;
Profile total length(X2) : Specify profiling width at X axis.
Profile Length(X1) : Specify each feed distance at X axis.
Each Feed Depth : Specify each feed depth at Z axis.
Commands :
:This command is use to Open or Cancel profiling function.
:This command is use to select Roughing or Finishing profiling.