13
Lubricate machine manually.
3.4.2
Auto
Cut of X axis
: Blade cut along X axis when head at 0 degree.
Cut of Y axis
: Blade cut along Y axis when head at 90 degrees.
Width
: The distance between two adjacent cutting.
Pieces
: Specify number of pieces to be cut and width.
X Axis cutting length
: Set cutting length of X axis.
Y Axis cutting length
: Set cutting length of X axis.
Z- Limit Location Value
: Set Z value of wood top surface. Press
to auto measure.
This parameter is the virtual of Z- limit switch. Set the data to a large negative
value before moving blade to top of wood.
This parameter is saved on the system, please set it when you use the machine
first time. Adjust this value when diameter of blade changes.
Clear all the data on the table.
Rotate head to 0 degree.
Rotate head to 90 degrees.
Set current position as origin of
“cut of X axis”
.
Set current position as origin of
“cut of Y axis”
.
Choose single or multi feed at depth direction (Z axis).
Indicate lamp of spindle speed. The red lamp will turn to green when
Summary of Contents for WS-8450
Page 1: ...WS 8450 Bridge Saw Operation Manual...
Page 7: ...5 1 2...
Page 17: ...15 Rotate head to 90 degrees...
Page 38: ...36 5 4 Hydraulic system...
