www.willburt.com
28
29
30
31
28.
Attach the ball end of cable to black key. To do this,
put the ball end of the cable through the bottom hole in
key from the side with the cutout slot on top and bottom.
29.
Thread the cable back through the top hole in the key
from the side with the cutout slot between the two holes.
30.
Hold the ball end of the cable up and then pull the
slack out from the bottom of the key to seat the ball end of
the cable into the recess in the top of the key.
31.
Place the key between the leg braces opposite of the
orange winch so the legs of the key are resting on the top
of the leg braces.
27
Do not duplicate, alter, or copy without the written consent of The Will-Burt Company. © Copyright 2013 The Will-Burt Company
