www.willburt.com
34
33
32
35
32.
Loading Tubes with Lift Plate:
With the orange lift
plate on the ground and the winch cable threaded through
the pulleys and attached to the key on the leg supports,
set the next tube onto the raised plug on the lifting plate.
33.
Crank the winch clockwise to raise and seat the tube
into the bottom of the tube in the tripod making sure to
fully engage the locking tabs.
34.
Loosen the clamp on the tripod and crank the winch
to raise the tube until one hand width is below the clamp.
Tighten the clamp.
35.
Crank the winch counter-clockwise to lower the lifting
plate to the ground making sure to keep tension on the
cable to make sure it reels out correctly.
28
Do not duplicate, alter, or copy without the written consent of The Will-Burt Company. © Copyright 2013 The Will-Burt Company
