13
14
15
12
www.willburt.com
12.
Insert the Top Tube:
Loosen the center clamp. Re
-
trieve the top tube (not the base tube). Insert the tube
from the top of the tripod with the locating notches to
-
ward the ground. Take note of small dimple in one of the
locating notches on the bottom of the top tube. Orient this
dimple toward you.
13.
Lower the tube until there is one hand width from the
bottom of the tube and tighten the clamp.
14.
Install Accessory Arm Collar:
Slide the arm collar
onto the top tube. Payload extension arms and other ac
-
cessories must be installed before top mast mount acces
-
sories or guy collors if guying.
15.
Tighten the top and bottom clamps.
Do not duplicate, alter, or copy without the written consent of The Will-Burt Company. © Copyright 2013 The Will-Burt Company
12
