www.willburt.com
18
18
19
17
16
16.
Pick an angle for the arm, line up the arm hole with
the arm collar hole, and pin the arm in place by pressing
the pin button.
17.
Pick an angle for the payload adaptor, line up the arm
hole with adapter hole, and pin the arm in place by press
-
ing the pin button.
18.
Installing 4-way Guy Collar:
If mast guying is re
-
quired, loosen the pin of the 4-way guy collar and place
the guy collar onto the top of the top tube. Connect the
payload to the top of the payload stub.
*For payload
weights and wind sail areas outside website specified
limits, contact the Will-Burt company.
19.
Rotate the guy collar so that the four guy lines will
land in the desired location.
Tighten the guy collar pin
and connect to the guy collar:
Remove the four guy line
spools from the guy bag and connect the single-line, hook
ends from the bottom, to the four holes in the 4-way guy
collar at 90
°
angles.
24
Do not duplicate, alter, or copy without the written consent of The Will-Burt Company. © Copyright 2013 The Will-Burt Company
