www.willburt.com
Do not attempt to deploy the tripod on ground that slopes more than 2
degrees.
Always observe weight lift limits.
Be mindful of buried cables when staking the mast.
Tip Over Hazard!
Mast tip over could result in death or serious injury. Do
not operate in high winds. Operate on level ground only. Stand clear of mast
and mast payload during operation. Be certain that the mast is level and
secure before and during installation, operation and maintenance.
Safety Instruction -
Trained Personnel Only! Death or serious injury could
result if proper inspection, installation, operation and maintenance pro
-
cedures are not observed. Installation, operation and maintenance to be
performed by trained and authorized personnel only. Proper eye protection
should be worn when servicing the mast.
Pinch Point Hazard!
Moving parts can crush and cut resulting in death or
serious injury. Keep clear of moving parts while operating mast.
Relocation Hazard!
Relocating the mast during operation or after ex
-
tension could result in death or serious injury. Do not relocate the mast
during operation or while extended.
Lifting Hazard!
The mast is intended to lift a specific payload for lighting,
surveillance or communication use only. Any other use without written
consent is prohibited and could cause death or serious injury. Do not
exceed specified payload capacity.
Electrocution Hazard!
Contact with high voltage will result in death or
serious injury. Observe general safety precautions for handling equipment
using high voltage. Do not locate or operate mast near electrical lines, cables
or other unwanted sources of electricity. Do not operate mast in lightning. Be
certain electrical cables are undamaged and properly terminated. Always dis
-
connect power before performing service, repair or test operations.
Do not duplicate, alter, or copy without the written consent of The Will-Burt Company. © Copyright 2013 The Will-Burt Company
5
