WIKA CPC8000-H, Operating Instructions Manual

Page: 65 / 85

8. Remote Operation
WIKA Operating Instruction High Pressure Controller, Model CPC8000-H 65
GB
1
42
3
59
9
3
.0
0/
0
6/2
0
17
/GB
Item Command or
Query
Data Response/Function
122. STABLEDELAY? <sp>XXXXXXX<cr><lf> Returns the stable time.
123. STABLETIME 0 to 65535 Sets the stable time to the
number of seconds specified.
124. STABLETIME? <sp>XXXXXXX<cr><lf> Returns the stable time.
125. STABLEWIN %FS value Sets the stable window as a %FS
126. STABLEWIN? <sp>n.nn<cr><lf> Returns the stable window.
127. STANDBY none Instrument placed in Standby
mode
128. STANDBY? <sp>(YES or NO)<cr><lf> Returns yes if instrument is in
Standby, no if otherwise
129. STEP value inside upper and lower
limits and inside the range of
the active sensor Sets the control step size for the
instrument
130. STEP- none Jogs the setpoint down one step
131. STEP+ none Jogs the setpoint up one step
132. STEP? <sp>+n.nn<cr><lf> Returns the control step for the
instrument
133. STEP% Value in % of current range Sets the control step in % of
current range.
134. STEPPCT Value in % of current range Sets the control step in % of
current range.
135. STEPPCT? <sp>n.nn<cr><lf> Returns the control step in % of
current range.
136. UNITS units code or text in
Table 7 Sets the engineering units for the
active channel
137. UNITS? <sp>CCCC<cr><lf> Returns the pressure units of the
active channel in a text string.
138. UNLOCK none Releases Acquire locks. See
ACQUIRE? and RELEASE?
139. UPPERLIMIT Value inside primary xducer-
Range in current units Sets the upper control limit for the
active transducer.
140. UPPERLIMIT? <sp>xxxxxxx<cr><lf> Returns the upper control limit for
the active transducer.
141. VENT None Instrument placed in Vent Mode
142. VENT? <sp>(YES or NO)<cr><lf> Returns yes if instrument is in
Vent, no if otherwise
143. WINDOW value in current units Sets the exponential filter window
for the active channel.
144. WINDOW? <sp>n.nn<cr><lf> Returns the exponential filter
window for the active channel.
145. ZERO desired pressure or ? Sets zero to set pressure or for ?,
clears previous value.
146. ZERO? <sp>xxxxxxx<cr><lf> Returns zero offset for active
channel.