92
GB
Commissioning
Disposal of the packaging
The packaging protects the appliance from transport damage. The pa-
ckaging materials have been selected according to environmental and
waste disposal aspects and can therefore be recycled.
The return of the packaging to the material cycle helps conserve raw ma-
terials and reduces the production of waste. When no longer required, dis-
pose of the packaging materials in accordance with the local regulations
in force.
NOTE
Keep the original packaging during the warranty period in order to
►
be able to pack the appliance properly in the event of a warranty
claim.
Demands on the installation location
For safe and trouble-free operation of the appliance, the installation locati-
on must satisfy the following requirements:
Install the appliance on a horizontal, heat-resistant and water-resis-
■
tance surface with a sufficient load-bearing strength.
Select the installation location such that children cannot touch hot sur-
■
faces of the appliance.
The appliance is not intended for installation in a wall or a built-in cup-
■
board.
The plug socket must be easily accessible so that the mains plug can be
■
easily pulled out in an emergency.
Electrical connection
For safe and trouble-free operation of the appliance, the following instruc-
tions must be observed for the electrical connection:
Before connecting the appliance, check the connection data (voltage
■
and frequency) on the rating plate with those of your mains power sup-
ply. This data must correspond in order to avoid damage to the appli-
ance. If in doubt, ask a qualified electrician.
The plug socket must be protected by at least a 10 A circuit breaker.
■
Ensure that the connecting lead is undamaged and is not laid over hot
surfaces or sharp edges.