
After downloading and executing the
software Windows may complain that the
supplier of the software could not be
verified. Ignore this warning and select
“Execute”.
Next the MUSEcontrol Setup Wizard
welcome screen is displayed. Click “Next”,
accept the license agreement and take a
look at the ReadMe notes.
Now you may change the default
installation folder and start the installation.
Now connect the PL512 with your mains
supply and use an USB cable to connect the computer with the PL512.
The computer will detect the new connected hardware and ask to connect to Windows
Update. Select “No” and click “Continue”.
Then accept the “Automatic install the software” selection by clicking “continue”.
Now the USB driver software be installed. To access your power supply, execute the
“WIENER USB Power Supply Control” application via your start menu.
3.2 The Main Window
After starting the application the main window shows a channel overview.
The measured sense voltage (Usense), current (Imodule) and terminal voltage (Umodule)
and a global status of
each channel are
displayed.
Clicking with the left
mouse button at a
channel toggles the
power state (OFF → ON
or ON → OFF).
Clicking with the right
mouse button opens the
output configuration
menu of this channel.
8. June 2010
11
*00679.A1