The following example describes the detailed steps to enter a sub menu and change the IP
gateway address.
Description
Switch
Display
1
switch the crate on
P▲
U0 5.01V 1.2A
select the requested main
operation mode
M▲ or M▼ (until right mode is
displayed)
TCPIP: no link
enter submenu
M▲(push and hold), P▲
Config: Wait
hold both switches up
Config: Wait...
after 4 seconds you can
Config: Ready !
release the switches
TCPIP Address
192.168.91.80
Select submenu “TCPIP
Gateway”
M▲ or M▼ (until right menu is
displayed)
TCPIP Gateway
192.168.91.94
Enter this menu
P▲
192.168.91.94
Change the value
M▲ or M▼
196.168.91.94
Accept change, to next item
P▲
196.168.91.94
Accept change, to next item
P▲
196.168.91.94
Accept change, to next item
P▲
196.168.91.94
Ready, back to submenu
selection
P▲
TCPIP Gateway
196.168.91.94
Ready, leave submenu
M▼
TCPIP: no link
2.9.3 Main Operating Modes and Associated Submenus
Operating
Mode
Submenu
Display
Display voltage and current of the selected output channel
U0 5.01V 72.A
Display the TCP/IP connection state
Possible values & symbols are:
no link (no cable connected)
10M (connected to 10M network)
100M (connected to 100M network)
HD (half duplex)
FD (full duplex)
↓, ↑, ↕ (Frame received, transmitted, both)
Ethernet 100M FD
1
Display: Two lines: displayed alternating, alternate background color: blinking
8. June 2010
8
*00679.A1