Digital Output
Wieland Electric GmbH | BA000941 | 01/2014 (Rev. A)
41
At CPU, PROFIBUS and PROFINET the input respectively out area is embedded to the
corresponding address area.
IX =
Index for access via CANopen
SX = Subindex for access via EtherCAT
No byte of the input area is used by the module.
Addr.
Name
Bytes
Function
IX
SX
+0
PlQ
1
State ot the outputs
Bit 0: DO 0
Bit 1: DO 1
Bit 2: DO 2
Bit 3: DO 3
Bit 7 … 4: reserved
5200h
01h
02h
03h
04h
Type
Order number
ricos FLEX 4xDO DC 24 V 0,5 A
83.036.3200.0
Current consumption/power loss
Current consumption from backplane bus
55 mA
Power loss
0.5 W
Technical data digital outputs
Number of outputs
4
Cable length, shielded
1000 m
Cable length, unshielded
600 m
Rated load voltage
DC 20.4 ... 28.8 V
Current consumption from load voltage L+
(without load)
10 mA
Total current per group, horizontal
configuration, 40°C
2 A
Total current per group, horizontal
configuration, 60°C
2 A
Total current per group, vertical
configuration
2 A
Output current at signal "1", rated value
0.5 A
Output delay of "0" to "1"
30 µs
Output delay of "1" to "0"
175 µs
Minimum load current
--
Lamp load
10 W
Parallel switching of outputs for redundant
control of a load
not possible
Parallel switching of outputs for increased
power
not possible
Actuation of digital input
Switching frequency with resistive load
max. 1000 Hz
Switching frequency with inductive load
max. 0.5 Hz
Switching frequency on lamp load
max. 10 Hz
Internal limitation of inductive shut-off
voltage
L+ (-52 V)
Short-circuit protection of output
yes, electronic
Trigger level
1 A
Number of operating cycle of relay outputs
--
Switching capacity of contacts
--
Output data size
4 Bit
Status information, alarms, diagnostics
Status display
green LED per channel
Interrupts
no
Process alarm
no
Diagnostic interrupt
no
Diagnostic functions
no
Diagnostics information read-out
none
Module state
green LED
In-/Output area
Input area
Output area
Technical data
