Whitmore OilSafe Advanced Bulk System, Owner'S Manual

Page: 27 / 43

Advanced Bulk System
25
9. MOVING YOUR SYSTEM
IF YOUR SYSTEM NEEDS TO BE MOVED FROM ITS PREVIOUSLY INSTALLED LOCATION FOR ANY REASON, USE THE FOLLOW-
ING PROCEDURE TO SECURE YOUR SYSTEM PRIOR TO MOVING.
STEP 1.
Pump all Bulk Tanks empty.
STEP 2.
Depressurize the system by opening each faucet without the pumps running.
STEP 3.
Lock out the main power supply.
STEP 4.
Close the Tank Isolation Valve on the bottom of all tanks
.
STEP 5.
Flush out the spill transport pallet (bottom of the pods) with hot water and cleaner/degreasing fluid.
STEP 6.
Disconnect the following for each tank assembly:
a.
Power cord from wall outlet.
b.
Faucets from control panel – if these will interfere with packing/transport.
c.
Tank level gauge and desiccant breather from any upper tanks.
d.
Place the hoses and cords in the spill pan at the bottom of the Pod.
STEP 7.
Repeat all steps until each pod is isolated similar to how it was delivered initially.
STEP 8.
Using a hand pallet truck, position the Tank Pod (Pod-1) into its new service position, ensuring that there is at least 18" of free clear space at the
rear and each end of the system.
STEP 9.
Continue to follow the normal installation steps for the system..
WARNING!
OilSafe DOES NOT recommend changing the type of fluid dispensed by a pump. Each system is custom-
built to customer specifications including the type of fluid stored. Contact your supplier if your fluid storage
needs change to remove the possibility of cross-contamination and incompatibility of system materials or
components with a new fluid.
Also be aware of any change in ambient room temperature in the new location. Ambient room temperature
should not be less than 60°F (15°C).