Whirlpool SPEEDCOOK GH6208 XR, Technical Education

Page: 52 / 96

4-20
6. To remove the FC ring heater:
a) Disconnect the two wires from the
heater element terminals (see the top
right photo).
b) Remove the four T10 torx screws from
the heater cover, remove the cover,
and turn it over.
d) Pry the clip off the FC motor shaft,
and remove the fan blade and the flat
washer below the blade from the shaft.
Remove the FC fan motor.
Clip
e) Remove the two screws from the FC
motor bracket and remove the bracket
from the motor.
FC Motor Bracket
Screws
c) Pry the clip off the FC motor shaft,
and remove the fan blade and the flat
washer below the blade from the shaft
(see the top left photo).
d) Remove the T10 torx screw from the
FC ring heater bracket, and the three
T10 torx screws from the inner heater
cover, then pull the inner cover off the
oven.
Heater Cover
Cover Screw
(1 of 4)
FC Ring Heater Wires
Cover & Bracket Screws
Inner Cover
FC Ring Heater