Whirlpool SPEEDCOOK GH6208 XR, Technical Education

Page: 51 / 96

4-19
REMOVING THE FC (FORCED CONVECTION) THERMOSTAT,
THE FC MOTOR, AND THE FC RING HEATER
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave oven or disconnect
power.
2. Remove the microwave oven from its
mounting location (see page 4-17 for the
procedure).
3. Remove the cabinet from the microwave
oven (see page 4-18 for the procedure).
4. To remove the FC thermostat:
a) Disconnect the two wires from the
thermostat terminals.
b) Remove the two screws from the ther-
mostat and remove it from the micro-
wave oven.
5. To remove the FC motor:
a) Disconnect the two wires from the FC
motor terminals.
b) Remove the three T10 torx screws from
the FC motor bracket, and remove the
motor from the heater cover.
Red Wire
Brown Wire
FC Thermostat
c) Remove the four T10 torx screws from
the heater cover, remove the cover,
and turn it over.
Bracket Screw
(1 of 3)
Heater Cover
Cover Screw (1 of 4)
Viewed From Left Side Of Oven
FC Motor
Red Wires
Continued on the next page.