Whirlpool duet GEW9200L Series, Job Aid

Page: 20 / 68

2-10
The dryer can be converted to exhaust out the
right or left sides, or through the bottom.
ELECTRICAL SHOCK HAZARD
Cover unused exhaust holes with the
following kit:
279818 (white)
Contact your local dealer.
Failure to follow these instructions can
result in death, fire, electrical shock, or
serious injury.
WARNING
OPTIONAL EXHAUST INFORMATION
LEVELING THE DRYER
Make sure that the floor is level with a maxi-
mum slope of 1
″
(2.5 cm) under the entire
dryer. If the slope is greater than that stated,
install the “Extended Dryer Feet Kit,”
#279810 .
If the dryer is not level, the clothes may not
tumble properly, and the automatic cycles may
not operate properly.
NOTE: Do not use the leveling legs if the dryer
will be installed on a pedestal.
4 Leveling Legs (supplied in parts package)
Number Of Type Of Box Or Angled
90
°°°°
Turns
Vent Louvered Hoods
Or Elbows Hoods
Rigid metal 64 ft (20 m) 58 ft (17.7 m)
Flexible metal 36 ft (11 m) 28 ft (8.5 m)
Rigid metal 54 ft (16.5 m) 48 ft (14.6 m)
Flexible metal 31 ft (9.4 m) 23 ft (7.0 m)
Rigid metal 44 ft (13.4 m) 38 ft (11.6 m)
Flexible metal 27 ft (8.2 m) 19 ft (5.8 m)
Rigid metal 35 ft (10.7 m) 29 ft (8.8 m)
Flexible metal 25 ft (7.6 m) 17 ft (5.2 m)
Rigid metal 27 ft (8.2 m) 21 ft (6.4 m)
Flexible metal 23 ft (7.0 m) 15 ft (4.6 m)
4
0
1
2
3