Whirlpool AER5522VAS0, Manual

Page: 67 / 70

17 3-
MRC II Fault Code Procedure (continued)
All F1 E* Codes (Control)
F2 Fault Code (Stuck Key on Control)
F3 E0 (Upper Oven Sensor), F3 E1 (Lower Oven Sensor)
Run Diagnostic Mode and verify •
fault Code •
Unplug range or disconnect power •
Replace Control •
Run Diagnostic Mode and verify •
fault code
Unplug range or disconnect power •
If fault code was F3 E0 - Check •
upper oven sensor for 1000-1200Ω
at P10-3 to P10-4
If fault code was F3 E1 - Check •
Lower Oven Sensor for 1000-1200 Ω
at P10-1 to P10-2
Check Sensor for short to ground. •
If checks are not correct - Replace •
Sensor
Run Diagnostic Mode and verify •
fault Code
Run Keyboard test •
Unplug range or disconnect •
power
If keyboard test fails - •
Replace User Interface
If keyboard test is successful - •
Replace Control