3
2-
MRC Control, True Convection, Steam Clean, Electric
MRC Convection, Electric (continued)
MRC Control, Fan Convection, Electric
MRC Control, True Convection, Electric
MER8772WB0
MER8772WB1
MER8772WS0
MER8772WS1
MER8772WW0
MER8772WW1
YMER8772WB0
YMER8772WB1
YMER8772WS0
Released
YMER8772WS1
YMER8772WW0
YMER8772WW1
YMERH770WB0
YMERH770WB1
YMERH770WS0
YMERH770WS1
YMERH770WW0
YMERH770WW1
Models:
Models:
MER8875WB0
MER8875WB1
MER8875WS0
MER8875WS1
MER8875WW0
MER8875WW1
Released
YMER8875WB0
YMER8875WB1
YMER8875WS0
YMER8875WS1
YMER8875WW0
YMER8875WW1
Previous Offset shown, or U-00 is displayed.
Adjusts temperature in 5
⁰F (3⁰C) increments
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Display
"TEST ON" ##⁰F "UO" (In the test mode)
"USAGE" (Displays hours of Operation)
"ENG MODE" (Manufacturing Information)
"TEST MODE" (Manual Check of Control relays)
"VERSION" (Manufacturing Information)
"DISPLAY" (Checks all LEDs in Display)
"CONTROL RESET" (Resets Control settings)
"FAULTS" *(Displays all Fault Codes)
"AUTO TEST" (Performs a complete check of
the OVEN, automatically)
When checking for fault codes and "NO FAULTS" is displayed, do not change the control.
"+" again
"+" again
Diagnostic Mode
1. Press CANCEL/CANCEL/START
2. Press the TEMP/TIME "+" key
Action
Press "+" again
"+" again
"+" again
"+" again
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy to use
and when the test is complete, test results will be provided. Whenever servicing the oven, this is
the test to run.
When in the Diagnostic mode, instructions will be provided by the control to help you through
each of the programs. Press Cancel to exit the test at any time.
*Press "Delay Start" to clear all fault codes.
Temperature Adjustment
Press TEMP/TIME "+" or "-".
Press "OVEN LIGHT" for 5 seconds.
Press START.
"+" again
Bake and Broil Temperatures are offset
automatically to the same degree.
If
START is not pressed within 1 minute, adjustment
is ignored.
Previous Offset shown, or U-00 is displayed.
Adjusts temperature in 5
⁰F (3⁰C) increments
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Display
"TEST ON" ##⁰F "UO" (In the test mode)
"USAGE" (Displays hours of Operation)
"ENG MODE" (Manufacturing Information)
"TEST MODE" (Manual Check of Control relays)
"VERSION" (Manufacturing Information)
"DISPLAY" (Checks all LEDs in Display)
"CONTROL RESET" (Resets Control settings)
"FAULTS" *(Displays all Fault Codes)
"AUTO TEST" (Performs a complete check of
the OVEN, automatically)
When checking for fault codes and "NO FAULTS" is displayed, do not change the control.
"+" again
"+" again
Diagnostic Mode
1. Press CANCEL/CANCEL/START
2. Press the TEMP/TIME "+" key
Action
Press "+" again
"+" again
"+" again
"+" again
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy to use
and when the test is complete, test results will be provided. Whenever servicing the oven, this is
the test to run.
When in the Diagnostic mode, instructions will be provided by the control to help you through
each of the programs. Press Cancel to exit the test at any time.
*Press "Delay Start" to clear all fault codes.
Temperature Adjustment
Press TEMP/TIME "+" or "-".
Press "OVEN LIGHT" for 5 seconds.
Press START.
"+" again
Bake and Broil Temperatures are offset
automatically to the same degree.
If
START is not pressed within 1 minute, adjustment
is ignored.
*Press “DELAY START” to clear all fault codes
Summary of Contents for AER5522VAS0
