35
Figure 3-19 System Info Tab Details
Figure 3-20 System LIO Info Tab
Associated Connections Tab
This tab is used to create, view, and edit Associated Connections, which
can be used to automate console or system operations. An Associated
Connection consists of two parts: a Triggered Connection and one or more
Associated Connections. When the triggered connection is made, the
system responds by automatically making the specified Associated
Connections.
Associated Connections are often created for Telco devices in order to
automatically connect the correct bus-minus signal to the Telco device.
This is shown in Figure 3-21, but one can automate many system
operations in response to the preset trigger connection being made by
defining Associated Connections.
Figure 3-21 Associated Connections Tab
A Triggering Connection is assigned by clicking Add… in the Triggered
Connections: section of the tab. This opens the Add Triggered Connection
dialog box where a source and destination are selected. In the example,
PHONE 1 taken on channel 12 on the EMX Surface. Clicking OK adds that
entry to the Triggered Connections list.
With a triggered connection highlighted, click the Add… button in the
Associated Connections: section to open the Add Associated Connection
dialog box to select the source and destination to be connected in
response to the trigger connection being made. In most cases you’ll want
to checkmark the Lock Override option. When checked, and the trigger
connection is detected, the selected source will be connected to the
destination even if another signal is connected and the destination is
locked. When Lock Override is not checked, the Associated Connection
would not be made if the destination is locked.
Summary of Contents for EMX
Page 4: ...4 ...
