WD-90GR FLEX / HC
Rev. 4.0 (202206)
Operating instructions
53
Weekly cleaning of granules (or as required)
The machine has an alarm which indicates when it is time to check the granule
level.
•
The granules must be collected.
•
Place the containers in the sink and rinse the granules using a hand show-
er.
•
Remove any food residues.
The machine must also be cleaned in accordance with the instructions for daily
cleaning.
Monthly cleaning of granules (or as required)
•
Collect the granules and tip it into a bucket.
•
Place the bucket containing the granules in the sink. Take the hand shower
and move it around in the granules, rinsing the granules carefully.
As the granules are heavier than the food residues, the food residues will float to
the surface and run off with the excess water. Follow the weekly cleaning instruc-
tions and allow the granules to air properly overnight.
Annual disinfection of granules (or as required)
•
Collect and clean the granules in accordance with the previous instruc-
tions.
•
Empty the machine and clean it in the usual way.
•
Press button (6) to switch off the power.
•
Pour the granules back into the machine.
•
Clean the rotating table, cover plates, filters and level pipe. Refit the com-
ponents.
N.B.! Contact the service engineer or detergent supplier to shut off the detergent
and drying agent dosing system.
•
Start the machine and fill it with water in the usual way.
•
Pour one litre of chlorine into the wash tank, then run programme P4.
•
Run programme P1 with granules three times followed by programme P4.
Then empty the chlorinated water from the tanks.
•
Refill the washing tank and run programme P1 once to rinse out the ma-
chine. The machine is now disinfected.
Contact the service engineer to switch the detergent and drying agent dosing sys-
tem back on.
Summary of Contents for WD-90GR FLEX
Page 2: ......
