WD-90GR FLEX / HC
Rev. 4.0 (202206)
Installation instructions
18
3.6
Installation and connection of auxiliary equipment and options
•
Once the machine is in place and has been adjusted horizontally and ver-
tically, the auxiliary equipment can be fitted.
•
The machine can be equipped with a number of options. Check what your
machine is equipped with, which depends on the model, machine type and
country.
The various options normally place no specific requirement on the installation.
3.7
Trial operation
Prepare the machine for trial operation with the help of OPERATING INSTRUC-
TIONS. The instructions describe the measures that must be taken to prepare the
machine for operation.
3.7.1
Start-up schedule
This should be completed when the machine is started up and used.
Read the installation and user manuals carefully. Then check the following points:
1. Check:
•
Water and waste pipe connections
•
That the machine is evenly balanced
•
That the cassette can easily be moved in and out of the machine
•
The equipment for detergent and drying agent is correctly connected
•
The filter, filter tray, cover plates and level pipe should be in position
•
The right amount of granules should be in the machine
•
That the overheating protection device is reset
•
That the FU21 and FU42 mini-switches are in the off position
2. Filling the dishwasher:
•
Open the tap(s) to the dishwasher’s water connection and fill the break tank
with water (option).
•
Vent the booster pump (option)
•
Start the dishwasher.
•
Check the direction of rotation of the pumps
N.B.! If the pump is rotating in the wrong direction, the phase must be in-
verted on the incoming electrical cable connection
•
Fill the machine with water
•
Turn on the mini-switches FU21 and FU42 when the booster heater and
tank have filled with water
Machine type:
Machine serial number:
Installation date:
Summary of Contents for WD-90GR FLEX
Page 2: ......
