WD-90GR FLEX / HC
Rev. 4.0 (202206)
Installation instructions
11
3.3
Transport and storage
Always transport the machine in an upright position.
Take care during transport, as there is a risk of tipping. N.B.! The machine must
not be transported without a pallet or other support. A packing notice will have
been applied to the packaging where the latter covers the front of the machine.
Some form of support beam must always be used along the sides of the machine
during transport. Otherwise the machine may become damaged. When transport-
ing the machine without a normal wooden pallet, always check that none of the
components underneath the machine can be damaged.
A=Pumps
B=Spacers
If the machine is not being installed immediately, it must be stored in a frost-free
area where the air is dry.
3.3.1
Unpacking
Check that all parts have been delivered by comparing them with the delivery
note.
Remove the packing material. Inspect the machine for any transport damage.
3.3.2
Recycling
Packaging must be sent for destruction or recycling in accordance with local reg-
ulations.
Summary of Contents for WD-90GR FLEX
Page 2: ......
