WD-90GR FLEX / HC
Rev. 4.0 (202206)
Operating instructions
46
Machines without a drain pump
•
N.B.! Before changing the water, you must run programme P4. Use a cas-
sette containing no items for washing.
•
Press the 0/1 button (6) to switch off the power. Keep the door shut and
press the buttons (17) on the side of the machine.
•
Lower the door in parallel with the front panel.
•
Take out the rotating table (16), the filter (14) and the cover plates (15).
Rinse these items in water.
•
Turn the level pipe (21) a quarter of a turn to empty the tank.
•
If necessary, rinse the wash tank and the granules with water.
•
Turn the level pipe (21) back a quarter of a turn until the rubber sleeve (22)
seals with the bottom plate.
•
Replace the cover plates, filter and rotating table.
•
Press 0/1 (6) and close the door.
•
The machine will now fill with clean water.
When the tank is full and the correct operating temperature has been reached,
the machine is ready for use again.
Machines with a drain pump
•
N.B.! Before changing the water, you must run programme P4. Use a cas-
sette containing no items for washing.
•
Press the 0/1 button (6) to switch off the power.
•
Take out the rotating table (16), the filter (14), the cover plates (15) and the
level pipe (21). Rinse these items in water.
•
Press the program button P1 to start the draining.
•
If necessary, rinse the wash tank and the granules with water.
•
Replace the level pipe, filter, cover plates and rotating table.
•
Press 0/1 (6) and close the door.
•
The machine will now fill with clean water.
When the tank is full and the correct operating temperature has been reached,
the machine is ready for use again.
Summary of Contents for WD-90GR FLEX
Page 2: ......
