![background image](http://html1.mh-extra.com/html/westfalia/wetekom-85-53-40/wetekom-85-53-40_instruction-manual_962855024.webp)
20
Operation
The values may be displayed as numerical values or as graphs.
The recorded values and graphs can be viewed in real time or later.
In the datastream menu you can select viewing all items, viewing selected
items or viewing the items as a graph. Use UP and DOWN to choose the
desired option.
Under the menu option “View All Items” all items will be displayed. This
may use several display pages, use LEFT and RIGHT to switch pages.
Press BACK to return to the previous menu.
Under the Menu option “Select Items” you can select the items which will
be displayed. Press ENTER to display the list of items, the list is several
display pages long, use LEFT and RIGHT to switch pages. Use UP and
DOWN to select items and confirm your selection with ENTER. After
selecting the desired items press BACK. The items are displayed. Use
LEFT and RIGHT to switch display pages if necessary. Press BACK to
return to the previous menu.
Under the menu option “View Graphic Items” select items in the same way
as described above. After BACK is pressed, the items will be displayed as
a graph. Press BACK to return to the previous menu.
Freeze Frame
When an emission-related fault occurs certain vehicle conditions are
recorded by the on-board computer. This information is referred to as the
freeze frame Data. These data provide a snapshot of the operating
conditions at the time of an emission-related fault. Erasing the DTCs may
also delete the freeze frame data, depending on the vehicle.
To review the freeze frame Data, Select “Freeze Frame” in the main menu
and confirm your selection with ENTER. The freeze frame data is
displayed over several screen pages, use LEFT and RIGHT to switch
pages. Press BACK to return to the previous menu.
O
2
Sensor Test
The results of the O
2
Sensor test are not live values but the results of the
ECU live sensor screens. Not all test values are applicable to all vehicles.
Therefore, the list generated will vary from vehicle to vehicle. In addition,
the Oxygen sensors screen is not supported by all vehicles.
Select “02 Sensor Test” in the diagnostic menu and confirm your selection
with ENTER. In the Following screen use UP and DOWN to select an O
2