81
P
o w e r
T
r a n s m i s s i o n
9.2.3
Remove the second seeger ring placed on the shaft on the same side of the
coupling as pointed out in section 9.2.1a and 9.2.1b.
9.2.4
Unscrew all the screws placed on the coupling crown and open both hydrome-
chanic coupling shells.
9.2.5
After the opening of the coupling, it is possible to clean it inside and/or replace
any worn parts with original WESTCAR spare parts.
9.2.6
To reassemble the coupling, follow the reverse sequence, repositioning the mim
seals with their edge inwards without deforming it.
The opening of the coupling and the spare part replacement have thus
ended.
9.2.3
9.2.4
9.2.6
P
art
9 - e
xtraordinary
M
aintenanceS
ROTOMEC
U
Se
and
M
aintenance
h
andbook