WESTCAR ROTOMEC ALFA, Original Instructions Manual, Page: 59 / 84

59
P
o w e r
T
r a n s m i s s i o n
P
art
6 - t
ranSMiSSion
o
il
f
illing and
c
alibration
ROTOMEC U
Se and
M
aintenance
h
andbook
CAUTION
Do not spill oil in the environment, but provide for its collection and
storage in appropriate drums and/or have it disposed of by authorised
firms. RISK OF POLLUTION.
6.3.2f
Remove any used key and/or cloth or tool from the coupling and from the
operating area. RISK OF PHYSICAL INTERFERENCE.
6.3.2g
Close the guard protecting the hydromechanic coupling operating area again.
6.3.2h
Mark down in the appropriate box of the COUPLING TECHNICAL DATA SHEET
the final calibration value (see FILLING DATA SHEET) for future oil replacement
or top-up.
The calibration of the horizontally mounted fluid coupling has thus ended.
6.3.2f
6.3.2g
2 P o w e r T r a n s m i s s i o n
I nstallation and maintenance manual ROTOMEC
Definition: Constant - fill FLUID COUPLING
Type:
_______________________________________ Code: _______________________________________
Series No _____________________________________ Year: ________________________________________
Transmission Fluid: _________________________ Filling: Standard Calibration
Actuation on primary wheel: internal ___________________
Temperature during start-up: max ____________ °C Rated operating temperature: ___________________ °C
Expected start-up time: _______________________ S Maximum start-up time: ________________________ S
Lubrication: standard constant self-lubricating
SAFETY/TEMPERATURE CONTROL DEVICES SUPPLIED:
TF (Fusible Plug) 96°C 120°C 145°C 180°C ____ °C
ETP (Expandable Thermal Plug) 96°C 120°C 145°C 180°C ____ °C
T09 (Plug with Thermostat and RPM counter) 100°C 120°C 145°C 160°C ____ °C
STANDARD MANUFACTURE ATEX MANUFACTURE
Ambient: _____________ Max Temp.: __________ °C Ambient: ZONE ______________ Max Temp: _______ °C
DRIVE SIDE DATAS:
Installation: Horizontal Vertical
Type of engine: Diesel Petrol ________________________ Rpm
Electric Voltage: _____ V _____ Hz _____ Rpm
Installed Power: __________________ kW Power input: __________________________ kW
DRIVEN SIDE DATAS:
Installation: Flexible coupling: YES NO Drive - through pulley
ROTOFLEXI type ______ bore Ø _____ Primitive diameter: ___________________________
ROTOPIN type ______ bore Ø _____ Grooves section: ________ N° grooves: ___________
ROTOGEAR type ______ bore Ø _____ bore Ø ______________ bore Ø ________________
LAMELLAR type ______ bore Ø _____ ___________________________________________
OPTIONS:
Brake Disc type __________________ Brake drum type ___________________
CUSTOMER
TYPE OF MACHINE: __________________________ TYPE OF WORK: _______________________________
No-load start-up Full-load start-up Start-up n./hour _________ Consecutive start-up n. ____
Load inertia (PD 2 ) ________________________ kgm 2 N° overloads ___________ Load start-up _______ sec.
Full-load start-up _________________________ sec. Bore drive end shaft _________________________ mm
Bore of driven end shaft ____________________ mm Operating area temperature ____________________ °C
ROTOMEC COUPLINGS
ORDER N.
ROTOMEC ALFA ROTOMEC BETA
WESTCAR s.r.l.
Via Monte Rosa 14
20149 - MILANO
Tel. +39-02-76110319
Fax +39-02-76110041
i n f o @ w e s t c a r. i t
w w w. w e s t c a r. i t
0.1 TECHNICAL SHEET HYDROMECHANIC COUPLING
ALFA K0
ALFA K1
ALFA K2 BETA H
BETA J
BETA X
BETA Z
P
art
0 – t
echnical
s
heet
6.3.2h