6.0 Using Special Features:
DEFAULT QTY
For each item, Default quantity will be 1. It also enables billing in two steps.
2 KEY Operations for Billing. (Will work similar to Hot Key)
2 Key Operations will work only in normal condition, if any of these option like
CASH RECEPTION, PRICE CHANGE, OVERALL DISCOUNT (% or RS) enabled
2 Key operation will not work & behaves as normal billing cycle.
Price change enable option by pressing PRINT Key after entering the Qty
In QTY entry mode if PRINT key pressed it will directly go to PRICE CHANGE mode
for that billing item(This short cut only for billing, it won't work in EDIT BILL mode).
If price change enabled, print button will not act as shortcut & price can then be
edited while editing bill.
Restore Defaults
Once the user presses the “Restore defaults” option the machine will loose all data
and will be like how the machine was when it was purchased. Only the item database
, settings, stock, header and footer will remain.
Erase data base
Once the user presses the “Restore defaults” option the machine will loose all data
and will be like how the machine was when it was purchased.
Voiding Bills
If Cancel Button is Pressed twice it asks for Password & then starting & ending
No for canceling Bill (work as shortcut for voiding bills).
Calculator Mode with Header/Footer
For Calculator mode, enter ITEM NO as 0 and press ENTER. It will print both header
and footer if enabled. Item no as “0” will not be accepted while billing. Maximum input
is 40 numbers for addition, subtraction, multiplication and division.
39
5.2
Don'ts
•
Don't keep the Product near sources of electrical interference like loud
speakers, cordless phones, etc., which might induce noise on your
equipment.
•
Don't connect your Product to the same outlets of those of large motors.
•
Don't connect your Product to output power in case of power fluctuation,
use a Voltage Stabilizer to connect your Product.
•
Don’t keep the serial interface cable connected, once the download
operation is complete.
•
Don’t touch the LCD screen with bare hands, It may lead to stains on
LCD.
•
Don’t subject the keypad to any kind of oil or liquid.
•
Don't use alcohol or thinner to clean the Product/parts. Alcohol and
thinner reacts with plastic parts and damages them.
•
Don’t spill any liquid or foreign material
inside the Product.
•
Don’t install a Product next to an Air Conditioner. Move it to the other side as
ar as possible because it may lead to condensation
of water which in turn leads to rusting of mechanical components.
•
Don’t
touch the head of Printer with anything.
•
Don’t touch the Paper cutter blade.
•
Don’t bend the power cord excessively or place any heavy objects onto it.
•
Ensure Paper Cover & keypad module is fixed in place.
•
Ensure power adapter cable is fully inserted in to the connector.
•
Please keep the packing material carefully and use it whenever you have to transport
the Product.
•
Ensure that the Product is cleaned daily and preventive maintenance is done
periodically to enhance the life of your Product.
•
Product
•
Use good quality of thermal paper for printing.
•
Only use the power cord supplied along with the product.
•
When connecting or disconnecting the plug, always hold the plug and not the cord.
•
Use a Soft dry cloth to clean your
.
Always use genuine WeP spare parts only.
