READY TO PROGRAM
4.6 Download Data Base / Header-Footer from Utility from Computer
• Connect Serial interface cable.
• Switch ON the Printer holding the READY button.
Display shows:
• Both READY and POWER LED will be glowing.
• Ensure BP series driver installed and should be selected as default.
• Create database and download it using BOUNTI BP-20/25T/50T/85T
Retail Utility.
4.7 USER login mode
•
During power ON, panel will display
•
USER need to enter user ID (1 to 15)
1 - Manager
2 to 15 - Clerks (Common users)
•
Press ENTER to continue
•
While downloading the database from Retail Utility. Display Shows…
•
Then the unit reinitialses.
•
Now product is ready for use.
•
Repeat the above steps for downloading the header/footer to product
Note 1: The Serial Interface cable should be removed from product after the data transfer.
Note 2: Before any data is downloaded to product, the following settings are required in personal
computer.
1. The default printer driver port : Serial port 4. Parity : None
2. Baud Rate : 19200 Bits per second
5. Stop bits : 1
3. Data bits : 8
6. Flow control :
None
PROGRAMMING..
WAIT...
USER ID:
ENTER PASSWORD
UDF NO.
Panel will display
•
(default password “0000”)
•
Type the Password and press ENTER
•
Panel will be display
•
Type the UDF (User Defined Field) no. & press ENTER
For BP25T/BP50T & BP 85T only
8
