6
To avoid damage to surfaces:
• Always wear gloves during assembly and installation.
• Lay any finished surfaces onto the cardboard and
foam packaging to help protect from damage.
• During assembly, dropped hardware can roll under
other components and cause damage to finished
surfaces.
Before Installation
Note:
The weight of each ceiling assembly is calculated and does not include the weight of the rigging
or rigging hardware.
Note:
Unless specifically agreed by Wenger Corporation, all rigging and rigging hardware is furnished
by the general contractor or facility owner.
Make sure that all rigging and
rigging hardware is capable of
lifting the calculated weight of
the ceiling assemblies.
Components can be heavy or
difficult to handle and may
require three or more people
working together to lift or
assemble.
Personnel must always wear a
safety harness when working
above the floor surface.
1. Read and understand the entire ceiling installation section before starting the installation.
2. Make sure that all personnel installing (including any temporary workers)
are trained and understand the installation procedure.
3. Review all installation drawings and reference drawings.
Save these drawings for future reference.
4. Make sure that all items on the shipment packing list are present.
!
CAUTION
!
WARNING
!
CAUTION
!
WARNING