32
Light Fixture Operation
Adjustment and Aiming
To adjust the angle and orientation of the LED array,
use the adjustment knobs located in the underside
of the light fixture.
1. Loosen the adjustment knobs to change the
LED array angle and orientation.
2. Use the knobs, to orient the LED array to
the desired angle.
3. Tighten the adjustment knobs to secure
the LED array in the new position.
Only tighten the adjustment knobs by hand.
Use of tooling could cause damage.
!
CAUTION
DMX Address Information
The Lieto White Fixture
requires 1 DMX Channel
The Lieto Color Fixture
requires 4 DMX Channels
Channel 1: Intensity (0-255)
Channel 1: Red (0-255)
Channel 2: Green (0-255)
Channel 3: Blue (0-255)
Channel 4: White (0-255)
Light Fixture Configuration (continued)
Adjustment
Knobs
Troubleshooting
The Lieto LED light fixture will default to “Full-On” when the
unit has power but no control signal.
LED Power Settings Chart
Wattage Power
Setting
(0-255)
30
0
40
18
50
35
60
54
70
70
75
80
80
90
90
110
100
130
110
146
120
160
125
167
130
175
140
190
150
205
160
227
170*
255*
*See step 9 on page 30.