Command with FXS Gateway
Command List
24-30
24.7.17 [voice]
The voice command is associated with the audio setting information.
There are four voice codecs supported by FXS Gateway.
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-send [G723 ms] [G711A ms] [G711U ms] [G729 ms] [G729A ms] [G729B ms]
[G729AB ms] ]
[-volume [voice level] [input level] [dtmf level]]
[-nscng [G723 used3]]
[-echo used] [-mindelay t1] [-maxdelay t2]
voice -print
voice -priority [G723] [G711A] [G711U] [G729] [G729A] [G729B] [G729AB]
-print Display voice codec information and configuration.
-send Specify sending packet size.
G.723 (30/60/90 ms)
G.711A (20/40/60 ms)
G.711U (20/40/60 ms)
G.729 (20/40/60 ms)
G.729A (20/40/60 ms)
G.729B (20/40/60 ms)
G.729AB (20/40/60 ms)
-priority Priority preference of installed codecs.
G.723
G.711A
G.711U
G.729
G.729A
G.729B
G.729AB
-volume Specify the following levels:
voice volume (0~63, default: 28),
input gain (0~38, default: 28),
dtmf volume (0~31, default: 23),
-nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0).
-echo Setting of echo canceller. (On=1, Off=0, per port basis).
