Command with FXS Gateway
Command List
24-17
This may take a few seconds, please wait..
Commit to flash memory ok!
usr/config$
Figure 24-12 Commit Commend List
Note:
Users shall use commit to save modified value, or they will not be activated after
system reboot.
24.7.6 [ifaddr]
Configure and display FXS Gateway network information.
usr/config$ ifaddr
LAN information and configuration
Usage:
ifaddr [-print]|[-dhcp used]|[-sntp mode [server][-cmcenter IPaddress]]
ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]
-print Display LAN information and configuration.
-ip Specify IP address.
-mask Set Internet subnet mask.
-gate Specify default gateway IP address
-dhcp Set DHCP client service flag (On/Off).
-http Set HTTP port number.
-dns Set DNS server IP address.
-sntp Set SNTP server mode and specify IP address.
-timezone Set local timezone.
-ipsharing Specify usage of an IP sharing device and specify IP address.
-ipchange Change IP address when using IP sharing function.
-cmcenter Specify IP address of management center.
Note:
Range of IP address setting (0.0.0.0 ~ 255.255.255.255).
DHCP client setting value (On=1, Off=0). If DHCP set to 'On',
Obtain a set of Internet configuration from DHCP server assgined.
SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode).
Example:
ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254
