Command with FXS Gateway
Command List
24-15
-status Display the enabled debug flags.
-add Add debug flag.
-delete Remove specified debug flag.
-open Start to show debug messages.
-close Stop showing debug messages.
Example:
debug -add h323 h323vp
debug -open
usr/config$
Figure 24-9 Debug Commend List
In this example, user open debug flags including h323, vp, h323vp.
usr/config$ debug -add h323 vp h323vp
usr/config$ debug –open
Parameter Usages:
-status
Display the enabled debug flags.
-add
Add debug flag.
-- h323: h323 related information
-- vp: voice related information
-delete
Remove specified debug flag.
-open
Start to show debug messages.
-close
Stop showing debug messages.
24.7.3 [reboot]
After commit command, type reboot to reload FXS Gateway in new configuration. The
procedure is as below:
usr/config$ reboot
..Attached TCP/IP interface to cpm unit 0
Attaching interface lo0..done
HTTPD initialized..
cmInitialize succeed!
Ras port:1024
