Command with FXS Gateway
Command List
24-32
usr/config$ voice –mindelay 90 –maxdelay 150 -optfacor 7
-echo
activate each canceler (1 = ON; 0 = OFF).
Note:
be sure to know well the application before you change
voice
parameters because
this might cause incompatibility.
24.7.18 [support]
This command provides some extra functions that might be needed by users.
usr/config$ support
Special Voice function support manIPulation
Usage:
support [-t38 enable] [-t38ecm enable] [-fstart enable] [-tunnel enable] [-h245f
s enable]
support -print
-t38 T.38(FAX) enabled/disabled.
-t38ecm T.38(FAX) ECM enabled/disabled.
-fstart Fast start enabled/disabled.
-tunnel H245 Tunneling enabled/disabled.
-h245fs H245 message after FastStart support enabled/disabled.
Example:
support -t38 1
support -t38ecm 1
support -fstart 0
support -tunnel 1
support -h245fs 1
usr/config$
Figure 24-25 Support Commend List
Parameter Usages:
print current settings in
support
command.
-t38
to switch ON/OFF (1 = ON; 0 = OFF) T.38 fax ability. When T.38 ability
is ON, FXS Gateway will automatically defer codec (G.723 or G.729a) to
T.38 when FAX signal is detected.
-t38ecm
Support the error correction in the high speed fax mode.
-fstart
to switch ON/OFF (1 = ON; 0 = OFF) fstartStart function. Fast Start
function can shorten the connection time if the opposite party also