Command with FXS Gateway
Command List
24-12
Step 3.
Different Rom uses different command.
A. Application Rom:
usr/config$ rom –app –s 192.168.1.1 –f 2fxs.114
B. 2MB Rom:
usr/config$ rom –boot2m –s 192.168.1.1 –f 2fxs.114
Description: -app / -boot2m means the prepared upgrade Rom; -s means where the
TFTP / FTP server IP Address is; -f is the Rom file name.
Step 4.
Download complete
A. Application Rom:
Command [flash -clean] to clear old configurations. It will keep all
configurations in [ifaddr] and [pppoe]. (Note: old version: such as 115a, will
only keep IP Address and MAC Address )
B. 2MB Rom:
If the version list is older than 113, all configurations will be back to default
value, including IP Address. In other word, user has to set IP Address and MAC
Address before [reboot] the device; otherwise, user cannot access to device any
more via Telnet.
The version 200 and above support to keep every configurations after upgrade.
Steps 4.1:
Find out MAC Address:
There are 12 digits on label on the back panel of the device, or
command as
usr/config$ ifaddr –ifshow (find the list information of Ethernet
address, it is MAC Address.
usr/config$ setmac (set as 2 digits as a group)
00
01
a8
00
xx
xx
if confirm, press y
Steps 4.2:
Set IP Address
usr/config$ ifaddr –ip xxx.xxx.xxx.xxx –mask xxx.xxx.xxx.xxx –gate
xxx.xxx.xxx.xxx (Please refer to Chapter 24.7.6)
Steps 4.3:
Hardware version confirmation
Upgrade 2MB Rom may change the hardware column. If it is not as the same as
the one, which is found on the label of back panel, please command as
usr/config$ rom –hwver x.x
