WELLSYSTEM Medical_Plus, Operating Instructions Manual

Page: 115 / 144

Operation
03/2018 1009909-05 Operating instructions – 43/70
End programming:
– Press the START / STOP button after all of the steps have been entered.
NOTE:
The START / STOP button must be pressed to activate the
card. The card will be erased if the button is not pressed and
it will have to be re-loaded.
– Remove the card.
3.8 Loading a chip card
The pre-programmed and user programmable chip cards can be topped up
for further massage sessions as often as necessary (see 'Presettings',
page 59).
When topping up, the chip cards are upgraded to a new software version and
can no longer be used in devices in which older software is used.
Remaining credit
Upgraded chip cards briefly display the number of massages left after they
have been inserted. The operating screen is displayed afterwards.
Chip card inserted incorrectly
If the chip card is inserted incorrectly, the error message Err is shown on the
display.