WELLSYSTEM Medical_Plus, Operating Instructions Manual

Page: 100 / 144

Description
28/70
2.4.1 Massage areas and massage types
If you use a chip card, the program stored on it will run automatically. If you
are not using a chip card then the full-body massage combined with the paral-
lel stroke continuous massage will be activated after start-up. You can change
the areas to be massaged and the type of massage at any time just by press-
ing the relevant button.
Massage areas
Button Function Button Function
Whole body massage Upper body massage
For the whole body mas-
sage, the massage noz-
zles move along the entire
bed.
For the upper body mas-
sage, the massage noz-
zles only move over the
top half of the bed.
Lower body massage Neck / shoulder massage
For the lower body mas-
sage, the massage noz-
zles only move over the
lower half of the bed. The massage nozzles
only move in the neck and
shoulder area.
Lumbar area massage Zone massage
The massage nozzles
only move in the lumbar
area. During zone massage the
massage nozzles move in
an area of approx. 20 cm.
Select the whole body
massage, wait until the
nozzles have reached the
desired body area when
moving from the head end
to the foot end and then
press zone massage.
Point massage
For the point massage,
the massage nozzles
move back and forth over
a short distance. Select
the whole body massage,
wait until the nozzles have
reached the desired body
area when moving from
the head end to the foot
end and then press Point
massage.