WELLSYSTEM Medical_Plus, Operating Instructions Manual

Page: 110 / 144

Operation
38/70
3.7 Programming
A memory slot (PR07) is reserved on the device for an individually compiled
massage program. Additional customized programs can be saved to blank
chip cards.
Every step is determined individually to compile a customised massage pro-
gramme. The pre-settings determine which procedure is be used as the de-
fault procedure, see page 58.
During programming the unit switches on automatically and follows the button
input. Nevertheless, the programming can be continued without interruption.
With chip card:
– Insert the chip card.
– Press and hold down the save program button for 3 seconds.
The display will change over to programming mode. The PH.01 display will
alternate with the phase duration (in minutes) during phase mode program-
ming. The St.01 display will alternate with the time entry (in seconds) during
free, specific programming mode.
Without a chip card:
NOTE!
Data loss!
A customized massage program stored on the device is
overwritten.
–
Check to see if the memory slot is already in use.
–
Press and hold down the save program button for 3 seconds.
The display will change over to programming mode. The PH.01 display will
alternate with the phase duration (in minutes) during phase mode program-
ming. The St.01 display will alternate with the time entry (in seconds) during
free, specific programming mode.
The program is automatically saved on the device and can be selected as
PR.07 upon completion.