Well DA-300N, User Manual

Page: 188 / 212

User’s Guide Configuring your Computers
5. Now you could see the result below:
Ping6
Once you have your DSL device configured, it is a good idea t
make sure o
e it, you must know
the IP address of the host you are trying to communicate with
and enter the IP address in the Host Address field. Click Go! To
start the ping command, the ping result will then be shown in
this page.
6. From
the head
Maintenance
menu, click on
Diagnostic ->
Ping6
. The following page is displayed:
you can ping the network. A ping command sends a
message to the host you specify. If the host receives the
message, it sends messages in reply. To us
Fields Description
Host The IP address you want to ping.
Function Description
buttons
PING To start the ping command
188