Well DA-300N User Manual Download Page 57

Page: 57 / 212

Wireless ADSL2+ Router User’s Guide

Field

Description

ADSL modulation Choose prefered xdsl standard protocols.

G.lite : G.992.2 Annex A
G.dmt : G.992.1 Annex A
T1.413 : T1.413 issue #2
ADSL2 : G.992.3 Annex A
ADSL2+ : G.992.5 Annex A

AnnexL Option

Enable/Disable ADSL2/ADSL2+ Annex L capability.

AnnexM Option

Enable/Disable ADSL2/ADSL2+ Annex M capability.

ADSL Capability “Bitswap Enable” : Enable/Disable bitswap capability.

“SRA Enable” : Enable/Disable SRA (seamless rate
adaptation) capability.

Function Button Description

Tone Mask

Choose tones to be masked. Mased tones will not
carry any data.

Apply Changes

Click to save the setting to the configuration and the
modem will be retrained.

Summary of Contents for DA-300N





















































































































































































































Search results

Summary of Contents for DA-300N

Reviews:

Related manuals for DA-300N

Brands by name

Popular brands

Well DA-300N, User Manual

Search results

Summary of Contents for DA-300N

Reviews:

Related manuals for DA-300N

Brands by name

Popular brands