Well DA-300N, User Manual

Page: 65 / 212

User’s Guide Configuring your Computers
10
DHCP Settings
You can configure your network and DSL device to use the
Dynamic Host Configuration Protocol (DHCP). This page
provides DHCP instructions for implementing it on your network
by selecting the role of DHCP protocol that this device wants to
play. There are two different DHCP roles that this device can act
as: DHCP Serve and DHCP Relay. When acting as DHCP
server, you can setup the server parameters at the
DHCP
Server
page; while acting as DHCP Relay, you can setup the
relay at the
DHCP Relay
page.
DHCP Server Configuration
1. From the left-hand
LAN
menu, click on
DHCP Settings
.
2. From
Services
check ratio, click on
DHCP Server Mode
.
3. Type a new IP Pool Range, Subnet Mask, Max Lease
Time, Domain Name and Gateway Address.
4. Click on
Apply Changes
.
65