4
Original Operating Manual
DANGER!
Danger when opening up the tool, as live parts are exposed. Before opening, unplug the tool to ensure disconnection
from the mains. Before putting into operation, check power supply cord and connector as well as extension cable for electrical and
mechanical damage.
Incorrect use of the Hot Air Tool (eg. overheating of the material) can cause a
fire and explosion hazard
, especially near
combus t ible materials and explosive gases. Do not apply to the same place for a long time. Heat can ignite flammable materials
which are not in view.
Fire and burn hazard!
Do not touch the heating element housing and air nozzle when they are hot as they can cause
burns
.
Let the tool cool down. Do not point the hot air flow in the direction of people or animals.
Before replacing a nozzle or storage after use, place the tool vertical down on its standing surface and allow it to cool down completely.
If the Hot Air Tool switches off autonomously in operation (thermal relay), switch tool off or disconnect the power supply from mains.
Before reusing, let the tool cool down.
The
voltage rating
stated on the tool must correspond to the mains voltage. EN 61000-3-11; Zmax = 0.215 Ω + j 0.134 Ω.
If necessary, consult supply authority.
For personal protection on building sites we
strongly recommend
the tool be connected to a
RCCB
(
R
esidual
C
urrent
C
ircuit
B
reaker).
The tool must be operated
under supervision.
This tool may be used by children aged 8 or above and by persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they are supervised or have been given instructions on how to use the tool safely and
understand the hazards involved. Do not allow children to play with the tool. Children are not allowed to clean or carry out
maintenance work on the tool without supervision.
Protect tool from
damp and wet.
Repairs
should only be carried out by
authorized service points
. Restricted to use with
original accessories and spare
parts.
Warning
Caution
DE
EN
IT
FR
ES
PT
NL
HY
TH
ZH
JA
MN
AR
FA
KO
Summary of Contents for HG 330-A
